First Layer Formulas
1-First of all keep the White color on the top as in the image:
2-Now, create a cross on the top of the white layer as in the image:
Now kindly have a look to the Formulas and it's directions below
- R: Right face clockwise rotation
- R*: Right face anticlockwise rotation
- L: Left face clockwise rotation
- L*: Left face anticlockwise rotation
- D: Down face clockwise rotation
- D*: Down face anticlockwise rotation
- F: Front face clockwise rotation
- F*: Front face anticlockwise rotation
- Ff: Double Front face clockwise rotation
- Ff*: Double Front face anticlockwise rotation
- U: Upper face clockwise rotation
- U*: Upper face anticlockwise rotation
- B: Back face clockwise rotation
- B*: Back face anticlockwise rotation
3- Now as you have achieved the + on the upper white layer, you need match the MIDDLES with the colors as well as in the image, see the black line is indicating the same, white white with blue blue and white white with orange on the top and middle and same for the other two colors:
4- Now match all the white corner to the top layer to achieve the full top white layer, but here you need to match the side corner of the relevant side's color as well, as in the image below using this formula R*D*RD till you have got the both corners for the white and the relevant color.
For this, first keep the white on top and blue color in front of your eyes and you'll see the I for blue color as well. Now right side you can see there is orange color so, you need to find out a layer having white, blue and orange and now apply this formula R*D*RD and you will get the corners done as in the image getting T to all the four corners with the same colors:
Follow the step 4 to get all the top white corners done with the relevant colors.
Now your first layer is completed and it will look like this from the top and front as in the image above.
2nd layer Formulas
For the 2nd Layer Hold the Cube which will be showing opposite T , You will see all the sides having T (Any one should be in front of your eyes while holding) as in the below images:
Now for example you need to fix the corners for the Orange T first, So i will choose orange and will bring the Orange on the top of the Opposite T and remember with Orange there shouldn't be yellow color of the top layer color (in my case it's Yellow), it should be Green or Blue only ( Green and Blue is the neighbors of Orange if you will look at you cube if you have cube like me with the same color) any of the T only as in the image:
Now use this formula if green is in the left side of the orange U*L U L* U F U* F*
And It will look like this as in the image once the corner is set using the above formula:
Now if you have to set the corners for right side, then you must find out a edge Ex: having Orange and Blue as in the Image: (Note: In your case you could have different color or you can take different color)
Now apply this formula to get the 2nd layer corners for Right Side: URU*R* U*F*UF
Now you have both corners set as in the below image:
Use the same formulas to set the right and left corners for the 2nd layer and you 2nd layer will be completed as in the below images:
3rd Layer Solution
0 Comments